FEP IP 4

Flush-mounting Phone for VoIP

The flush-mounting phone FEP-IP is designed for the direct use at LAN with VoIP in professional environment. Where ever conventional phones cannot be used, because of different reasons (i.e. mounting, burglary), FEP-IP is the suitable telephone:

• In control consoles
• At shipbuilding
• As emergency phone
• In warehouses or other self-service zones as centre for customer information
• In IT racks

FEP-IP always works as a VoIP phone in SIP environment. If the LAN connection does not work, the additional existing telephone interface (POTS a/b/ tivated, to hold availibility. No parasitic gateway function between LAN and phone line can be activated.

The installation dimension of FEP-IP of the flush-mounting phone FEP-IP can replace an a/b FEP 2010.

Version options of FEP-IP:

• Handset with magnetic clamp for vertical installation
• 4 screw holes for wall or desk mounting
  (Opening for assembly: L=260 x W=90 mm)
• Illuminated keypad
• Without keypad with programmed call number
• Handset with Push-to-Talk (PTT) or Push-to-Mute (PTM) key
• Custom-specific dimensions and surface of the front
• Helix cable of handset pluggable

General features of the FEP-IP 4:

• LAN-interface: Ethernet 100/10 Base-T(x) with IP-Protocol, RJ45 jack
• VoIP-signaling SIP (RFC 3261)
• Speech coding G.711
• Fallback: analogue (a/b) phone line
• DTMF post-dialling after dial-up (automatically acc. to RFC2833 or in-band)
• Web-supported configuration and remote maintenance
• Optical and acoustical call indication
• Switch off option for ringer (in this case optical call indication only)
• 10 short-code dialling destinations
• Repeated dialling
• Callback of unanswered calls (optical indication)
• Remote dialling using TCP/IP connection
• Ringing only to tolerated caller numbers
• Front surface / handset colour options:
  • grey (RAL 7032) / grey
  • beige (RAL 1015) / beige
  • black (RAL 9005) / black
  • Aluminum, anodized natural (C 1)
• Handset colour suits to front surface
• Handset with helix cable, 4 wire, 30 cm length (other length optional), hard-wired to FEP-IP
• Dimension FEP-IP standard:
  • Outer dimensions: L=280 x W=110 x H=50 mm
  • Opening for assembly: L=270 x W=100 mm
• IP connection cable (cat. 5), length: 3m
• PoE according to IEEE 802.3af (Kl.0) or external 12V-DC power supply or mains unit 230V AC

FEP -IP 4 with Display

Flush-mounting phone

Special features for FEP-IP 4 with display:

• LCD-Display with backlight, 5 lines
• Navigation for user menu over 4 keys
• Phone directory (100 destinations)
• Up to 15 keys for direct calls (user labelled)
• 2 status LED for direct calls (called, calling, waiting, lost call)
• Interface for headset
• Open listening
• Automatic call accept (Headset or open listening)
• Surface black RAL 9005
• Handset black RAL 9005
• Handset with helix cable, 4 wire, 30 cm length, pluggable (RJ 10)
• Desk mount using 4 screw wholes
• Dimension FEP-IP with display:
  - Outer dimensions: L=280 x W=190 x H=60 mm
  - Opening for assembly: L=260 x W=170 mm
• PoE according to IEEE 802.3af (Kl.0)